水中盛装战斗机（泰国战斗机）

泰国战斗机又称暹罗战斗机，主要生产于泰国、印度尼西亚、马来西亚、越南、柬埔寨等国。其中，泰国和印度尼西亚是最丰富的物种，因此它们也被统称为泰国斗鱼“半个月的红龙”，这是大约十年前的事了。虽然我认识泰国斗牛士很长时间了，但我从未见过任何真实的东西。我偶然在鱼市看到一个泰国绿斗牛士，就把它放在了一个罐子里。它绝对是目前最常见的品种，但当时它很着迷。它要价10元，毫不犹豫地收下了。它是用红色剑鱼饲养的。我不时拿一面镜子看着它，看着它鼓起脸颊，张开三个鳍。在灯光下，它的身体反射出金属光泽，像一个穿着得体的战士。从那时起，我去了论坛，了解了泰国斗鱼的相关信息。我知道泰国斗鱼有很多种。这只是最常见的马尾鱼。出于各种原因，我从那以后就再也没有养过斗鱼了，但我还是爱不释手。今年，我有足够的时间在家，所以我又开始繁殖了。我还和朋友们分享了我最近的一些经历，并相互学习。

泰国示范班斗鱼的水质呈微酸性。家庭饲养的PH值一般为6.0-7。一般来说，水质是通过使用橄榄叶或沉木来调节的

泰国斗鱼属于Myristidae科，会上升到水面进行空气交换。同科常见的有丽丽鱼、爬鲈、龙、珍珠等，是比较容易饲养的小型观赏鱼，对水质要求不高。然而，养好和喂好是两码事。为了保持良好，它需要更仔细的护理，并且需要提供相对较宽的水体。我的鱼缸是30*20*25cm，饲料应该尽可能活，北方常见的水蚤和红线虫可以使用。温度在20℃以上，但尽量不要超过26℃。大多数热带鱼具有良好的温度适应性，水温的剧烈变化是鱼类疾病和死亡的真正原因

作者认为，泰国斗鱼在北方大规模繁殖的瓶颈是成年雄性必须单独饲养，这增加了换水、清洁、喂食和温度控制等日常工作的难度。但在爱情面前所有的困难都不是什么，都是累和快乐的。马尾斗鱼（VT）：尾鳍像马尾的形状，相对优雅，是最常见的一种。饲养难度很小，它是饲养难度最大的领导者之一：☆

给水温度：20-26℃

红马尾

2。狮王斗鱼（CT）：尾鳍膜收缩，呈针状，像皇冠，称为冠尾，也像雄狮脸上的鬃毛，因此也被称为狮王。这是一种常见的品种，很难饲养。由于水温和水质的变化，针头会融化。

喂食困难：☆☆

给水温度：21-27℃

狮子王将军

3。一般斗鱼（PK）：三鳍短而结实，人们培育的斗鱼是一般斗鱼。喂食困难

喂食困难：☆☆

给水温度：22-27℃

白色一般

4。半月斗鱼（HM）：三个鳍宽，尾鳍张开的角度达到180度，就像半月形，俗称半月形；尾鳍超过180度的斗鱼被称为OHM，这是HM中最好的。

喂食难度：☆☆☆☆

给水温度：22-27℃

红半月

5。大耳朵（大象耳朵）斗鱼：这种品种比市场上的马尾、半月、将军和狮子王都少，也就是说，胸鳍非常大，像大象耳朵。基因稳定性一般，一定比例的后代不是象耳

喂养困难：

喂养难度：☆☆☆

喂食水温：21-27℃

双尾斗鱼

（II）泰国斗鱼按颜色和比例分类：

1。颜色：红色、超红色、绿色、蓝色、黑色、超黑色、白色、黄色、土耳其绿色等斗龙鱼：全身覆盖着厚厚的白色鳞片，层次感十足。一个好的龙系统需要白色鳞片在其背鳍和腹鳍上延伸。多色斗鱼：至少有两种或更多颜色的斗鱼可以根据泰国斗鱼原有的四种颜色组合成256种颜色。蓝-红或绿-红搭配是最常见的。从某种意义上说，在培育纯种斗鱼的过程中，克服返祖现象也是一件相对困难的事情。但在改进过程中，培育出了许多颜色搭配非常漂亮的颜色系统，如大理石（多色）、银河（闪光刻度）、锦鲤（锦鲤颜色）、扇子（透明基因的多色）、糖果（金属系统）等，其被分类为FancyKoi。如果没有半透明的基因，那就是大理石，有些鳍呈现半透明效果，全身均匀分布着闪烁的鳞片。它们被分类为银河锦鲤

银河锦鲤

需要注意的是，由于多色斗鱼基因的复杂性，斗鱼本身的颜色和颜色以及色块的表达和分布将随着鱼龄和摄食环境的变化而变化。因此，我们需要在育种过程中仔细观察和仔细选择Dressed Fighter in the Water (Thai Fighter)

Thai Fighter is also called Siamese Fighter, which is mainly produced in Thailand, Indonesia, Malaysia, Vietnam, Cambodia and other countries. Among them, Thailand and Indonesia are the most abundant species, so they are also collectively referred to as Thai betta

Red Dragon half a month

It was about ten years ago. Although I have known Thai matador for a long time, I have never seen any real thing. I happened to see a green Thai matador in the fish market and kept it in a jar. It is definitely the most common variety at present, but it was fascinated at that time. It asked for 10 yuan and took it without hesitation. It was raised with the red swordfish. From time to time, I take a mirror to look at it, and watch it bulge its cheeks and open its three fins. Under the light, its body reflects metallic luster, like a well-dressed fighter. From then on, I went to the forum and learned about the relevant information of Thai fighting fish. I knew that there are many varieties of Thai fighting fish. This is just the most common horsetail

For various reasons, I have never raised a fighting fish since then, but I can't put it down. This year, I have plenty of time at home, so I started breeding again. I also share some of my recent experiences with my friends and learn from each other

The water quality of Thailand's demonstration class betta is slightly acidic. Generally, the PH value of domestic rearing is 6.0-7. Generally, the water quality is adjusted by using olive leaf or sunken wood

The Thai betta belongs to the family Myristidae, which will rise to the water surface for air exchange. The common ones in the same family are Lili fish, perch climbing, dragons, pearls, etc., which are small ornamental fish that are relatively easy to raise, and have no high requirements on the water quality. However, it is two different things to keep and feed well. To keep well, it needs more careful care, and it needs to provide a relatively wide water body. My fishbowl is 30 * 20 * 25cm, and the feed should be live as much as possible, The common water fleas and red nematodes in the north can be used. The temperature is above 20 ℃, but try not to exceed 26 ℃. Most tropical fish have good temperature adaptability, and the drastic change of water temperature is the real cause of disease and death of fish

The author believes that the bottleneck of large-scale breeding of Thai bettas in the north is that adult males must be raised alone, which increases the difficulty of daily work such as changing water, cleaning, feeding and temperature control. But all the difficulties in front of love are not things, tired and happy

（1） Thai betta is classified by fin type:

1. Horsetail betta (VT): The tail fin is like the shape of horsetail, relatively elegant, and is the most common one. It is hardly difficult to raise, and it is one of the best leaders to raise

Feeding difficulty: ☆

Feeding water temperature: 20-26 ℃

Red horsetail

2. Lion king fighting fish (CT): the tail fin membrane shrinks and appears needle like a crown, which is called crown tail, and also like the mane on the face of a male lion, so it is also called lion king. It is a common breed, and it is difficult to feed. There will be needle melting due to changes in water temperature and water quality

Feeding difficulty: ☆☆

Feeding water temperature: 21-27 ℃

Lion King General

3. General fighting fish (PK): the three fins are short and strong, and the fighting fighting fish cultivated by people are general fighting fish. It is difficult to feed

Feeding difficulty: ☆☆

Feeding water temperature: 22-27 ℃

White general

4. Half moon betta (HM): three fins are wide, and the angle of tail fin expansion reaches 180 degrees, just like half of the moon, commonly known as half moon; The betta with tail fin more than 180 degrees is called OHM, which is the best in HM.

Feeding difficulty: ☆☆☆☆

Feeding water temperature: 22-27 ℃

Red half moon

5. Big-ear (elephant ear) betta: This kind of breed is less than horsetail, half moon, general and lion king on the market, that is, the pectoral fin is very large, like elephant ears. The gene stability is general, and a certain proportion of offspring are not elephant ears

Feeding difficulty:

Feeding difficulty: ☆☆☆

Feeding water temperature: 21-27 ℃

Double tailed Betta

(II) Thai Betta are classified by color and scale:

1. Concolorous: red, ultrared, green, blue, black, ultrablack, white, yellow, Türkiye green, etc Dragon fighting fish: The whole body is covered with thick white scales, with a full sense of hierarchy. A good dragon system needs white scales to extend on its dorsal and ventral fins

Yellow Dragon

Black Dragon

Red Dragon

4. Multi-color betta: The betta with at least two or more colors can be combined into 256 colors according to the original four colors of Thai betta. Blue-red or green-red matching is the most common. In a sense, it is also a relatively difficult to overcome the atavism in the cultivation of pure color betta

But in the process of improvement, many color systems with very beautiful color matching have been cultivated, such as marble (multicolor), Galaxy (flash scale), Koi (koi color), fan (multicolor of transparent gene), candy (metal system), etc, Some of the fins show translucent effect, which is classified as FancyKoi. If there is no translucent gene, it is marble, Some of the fins show translucent effect, and the whole body is evenly distributed with flashing scales. They are classified as Galaxy Koi

Galaxy Koi

It should be noted that due to the complexity of the genes of the polychromatic betta, the color and color of the betta itself and the expression and distribution of color blocks will change with the change of fish age and feeding environment. Therefore, we need to carefully observe and carefully select in the breeding process, so as to cultivate a good fish that we like, This sense of achievement will bring you a lot of happiness that can't be achieved. Maybe this is the real meaning of fish farming